Hypodermic Needles with Aluminum Hub has a color coded, two piece rigid pack sheath with a tamper evident heat stake that is coupled with a precision aluminum hub for increased stability during needle use.

Gray hose cuff used on carpet cleaning vacuum hose. For use on 1.5" vacuum hose and 1.5" carpet cleaning tools.

Gray, 2" vacuum hose connector for carpet cleaning vacuum hose. Fits all brands of hoses.

Use this cuff to connect 1.5" carpet and tile cleaning tools to 2" carpet cleaning vacuum hose. Commonly used on 1.5" carpet cleaning wands and tile cleaning tools.

1.5" gray vinyl swivel cuff helps avoid kinks in your truckmount or portable vacuum hose.

Yellow Tip for High Pressure In Line Sprayer.  9:1 Ratio

2" vacuum hose cuff swivels so your vacuum hose does not kink up. It is made of durable vinyl and fits all brands of carpet cleaning truckmount hose.

1/4" Shutoff Valve Repair Kit, 3000 psi.  Repair Kit Only!

This bone scraper is a tool no carpet care professional can afford to be without. This 4.5” x 3/4” scraper is smooth with rounded edges for optimal particle removal. Particularly effective when dealing with gum removal, the bone scraper hasn’t met a piece of unwanted carpet matter it can’t remove.

This 60cc syringe is used for injecting deodorizers deep into the carpet and pad or upholstery when neutralizing urine odors.  Can also be used for injecting adhesive for de-lamination or bubbles in glue-down carpet. (Syringe Only)

The Carpet Shark is your ultimate spotting tool. With a serrated scraper, spatula blade, and penetrator / groomer, the Shark gives you everything you need to attack gum, tar, adhesives, chewing gum and more. This tool is also great for any variety of spot and stain removal situations.

This gum getter is designed to remove gum more effectively, has jagged edges to help get the gum up fast. This tool is also great for any variety of spot and stain removal situations.

The professional carpet cleaner is likely to encounter some spots that call for special attention. There are a number of quality cleaning solutions that are made for particular types of stains and spots. All need the use of a spotting brush to help penetrate and allow the solution to work.

This handle is for the Grout Brush. It is a lacquered wood handle with a tapered head that attaches to the Grout Brush. 60 inches in lenght and is 1 1/8 inches in diameter.

This 5qt. container will keep chemicals safe while transporting them, then mix them up fast on site. Increase your efficiency by having different chemicals in it's ready to use jugs. These 5qt. containers are made to fit Hydra Force Sprayers and In line sprayer.

Impress your customers with your attention to detail with this Crevice Tool!

• Fits Standard 2" Hose Cuffs.
• Vacuums dirt and debris from corners and next to baseboards.
• A more economical solution to expensive stainless steel crevice tools.
• Made of plastic for lighter weight.
• Dimensions are: 2"X16"

Replacement VeeJet for carpet cleaning inline injection sprayers. Works on all brands.

• Size: 6505 (65 Degree Spray Fan, 05 orifice)
• Brass
• 1/4" Female Thread

Every professional carpet cleaner should have a protective Corner Guard. The Wall Buddy Corner Guards can be used in the Carpet Cleaning Industry, as well as Janitorial, and Painting Industries. The Corner Guards are made from a lightweight non-marking durable plastic. The Corner Guards portray a professional image, which reassures your customer that you care. The Corner Guards protect all of the Corners of the walls and Furniture on your job. The Corner Guards protect against costly insurance claims due to damaged corners or walls.

Kingston angle "K" valve repair kit

PMF V2P & "K" straight valve repair kit # RV2P

Rebuild kit for Pro's Choice Dual Chamber sprayers. Rebuild your sprayer for about half the cost of buying a new one!

Instructions included.

Can be used on Red Relief (4001) and Stain Magic (4002) sprayers.

Our blue microfiber bonnets are a double sided 80/20 blend and are chemical resistant and highly absorbent.

Microfiber bonnets use less water and chemical and do a great job of picking up and holding soil from carpet or upholstery.

An excellent choice for low moisture cleaning processes in hotels, airports, schools and other commercial facilities where fast drying is required.

Can be re-used many times; machine washable.

Use with Cimex machines or hand held buffing tools.

Replacement metering tip and dip tube assembly for carpet cleaning inline injection sprayers.

• Complete with foot filter
• 1:9 Yellow Metering Tip
• 8.5" Tube Length

Lighter and less bulky than standard upholstery cleaning tools, our plastic vacuum nozzle will make vacuuming upholstery a breeze! Vacuum nozzles come in 2" and 1.5" size to fit all standard carpet cleaning vacuum hose and cuffs.

Lighter and less bulky than standard upholstery cleaning tools, our plastic vacuum nozzle will make vacuuming upholstery a breeze! Vacuum nozzles come in 2" and 1.5" size to fit all standard carpet cleaning vacuum hose and cuffs.

The Wall Buddy Corner Guards can be used in the Carpet Cleaning Industry, as well as Janitorial, and Painting Industries. The Corner Guards are made from a lightweight non-marking durable plastic. The Corner Guards portray a professional image, which reassures your customer that you care. The Corner Guards protect all of the Corners of the walls and Furniture on your job. The Corner Guards protect against costly insurance claims due to damaged corners or walls.

This handle is for the Grandi Groom and the Grandi Brush. It is a lacquered wood handle with a metal head that attaches to the Groom or Brush. 57 inches in lenght and is 15/16 inches in diameter.

Varied uses include strapping together your solution and vacuum hoses, holding together your Hydro-Force sprayer, etc. Set of 3 Black Velcro Hose Straps Strong and Durable 1 1/2" X 12"

This 60cc syringe kit is used for injecting deodorizers deep into the carpet and pad or upholstery when neutralizing urine odors.  Can also be used for injecting adhesive for de-lamination or bubbles in glue-down carpet.

1/4" M-F Quick Disconnect Set. All brass construction with stainless steel spring and a temperature rating of -20F to 400F. Operating pressure from 5 psi to 4000psi. Double viton o-rings at connection point.